 |
 |
Nice - aren’t they?
These were made specifically for a room where light oak, cream and golds were the dominant colours, and they had to match with the decor exactly as the owners wanted.
Height and speaker size, as well as seating height, were all taken into consideration.
These are available in many shades of anodised finishes – silver, gold, bronze & black. They can be mirror polished or very lightly finished (as these are) before anodising.
Powder coating in many standard ‘RAL’ colours is also an option.
This gives you, the customer, almost total control over just how your stands will look. They will only be made to order, as each customer will have different requirements on size & colour.
This is currently our ‘Ultimate’ stand, and we incorporate into them just as much as we can to make them work extremely well.
The bases of solid aluminium & laminate use three levelling studs (either spikes or cones dependant on flooring) and sub floor construction (wood or solid sub floor, carpet, laminate, tiles). There are two outer studs that provide an anti tip solution. All five studs are locked into place with specially engineered locking cones.
The legs are individually machined to sit into cups bored into the base & top, making a very neat joint.
The top is again aluminium & laminate, with our roller system incorporated into it. These can be made to include various ‘safety’ devices should they be required, such as movement limiters, set up aligners & rubber anti tip studs. An anti slip top is standard, but it would also be possible to permanently fix the top plate to the speaker base should this be required.
We can also add a degree of speaker cable management to the rear of the stand as another option.
We have pairs available for your dealer to demonstrate, and obviously you will need to speak with them about sizes and finishes required.
Remember – these are custom made to not only look fantastic and fit in with your room decor exactly as you want – they also sound utterly sublime!
Back to Product List
|